Enphase
The distributed architecture of the IQ 5P utilizes six integrated microinverters per unit, providing redundancy compared to centralized battery inverters. The 3.84 kW continuous output from a 5 kWh capacity provides a high C-rate, suitable for managing load spikes within a modular configuration.
The AC-coupled nature introduces conversion losses compared to high-voltage DC systems. The system relies on the Enphase App and System Controller for coordination during grid outages.
At 66 kg, the 5P is lighter than many monolithic units, often allowing for single-person handling. Wiring is performed via the Enphase communications bus. Verify that the main panel can handle the aggregate AC output for multi-unit configurations.
Usable Capacity
4.96 kWh
Continuous Output
3.84 kW
Peak Output
7.68 kW
for up to 3s
Chemistry
LiFePO4
Links lead directly to official manufacturer or regulator documentation. BatteryBlueprint does not use affiliate links for hardware specifications.
Estimated Cost
$3,500 - $5,000 (Per unit)
Warranty
15 Years
Cycle Life (Est.)
6,000 Cycles
End of Life Capacity
60% Retention
Certifications
Disclaimer: Battery specifications are provided for planning and educational purposes only. Always verify compatibility, certification, warranty terms, and installation requirements with the manufacturer and a qualified installer before purchasing. BatteryBlueprint compiles this data from publicly available datasheets and official manufacturer releases; specifications may change without notice or vary by local grid regulations.