BYD
The high-voltage (HV) architecture of the BYD Premium HVS minimizes conversion losses when paired with compatible HV hybrid inverters. By linking battery modules in series rather than parallel, the system operates at voltages closer to the solar array, improving overall round-trip efficiency. The 10.2 kW continuous output matches its capacity (1C rate), making it exceptionally responsive to dynamic loads. It is best considered where inverter efficiency and clean installation are paramount.
Unlike 48V systems, HV batteries are highly specific to the inverters they are tested with. You must strictly adhere to BYD's compatible inverter list. The modular blocks make transportation and future capacity upgrades remarkably simple.
The patented plug-and-play design means no external communication or power cables are needed between the stacked battery modules. However, ensure the floor can support the concentrated weight (167 kg) of a fully assembled tower.
Usable Capacity
10.2 kWh
Continuous Output
10.2 kW
Peak Output
15 kW (5s)
Chemistry
LiFePO4
Links lead directly to official manufacturer or regulator documentation. BatteryBlueprint does not use affiliate links for hardware specifications.
Estimated Cost
$6,000 - $8,000
Warranty
10 Years
Cycle Life (Est.)
6,000
End of Life Capacity
60% Retention
Certifications
Disclaimer: Battery specifications are provided for planning and educational purposes only. Always verify compatibility, certification, warranty terms, and installation requirements with the manufacturer and a qualified installer before purchasing. BatteryBlueprint compiles this data from publicly available datasheets and official manufacturer releases; specifications may change without notice or vary by local grid regulations.